Terminal Blocks for Al/Cu Conductors

Terminal Blocks for Al/Cu Conductors was launched only a few years ago and has already a significant impact on the market. Terminal Blocks has a wide application area including traditional panel building as well as the manufacture of machinery and equipment.
Terminal Blocks product range covers all normal building construction needs. The terminals are suitable for both aluminium and copper conductors from 2.5 mm² to 240 mm². In addition, our Terminal Blocks series includes a three­pole terminal block that supports a three­phase system.

Area of use

Electrical engineering, power engineering, industrial automatics are the areas where the necessity of connecting high-current power leads is often required. The system of mounting equipment on a DIN bus, commonly used in automatics, greatly facilitates installers’ work, it has been tested against durability and comfort of work. At the same time, it ensures very good after-market service of the used equipment. Damaged equipment can be quickly replaced with a working one, and such replacement does not cause a long down time, e.g. of a manufacturing line.
As electricians say: “each equipment works more efficiently when it is connected to the mains”. However, the problem is how to provide proper quality of such connection. The difficulty of this task increases proportionally with the increase of distributed currents intensity. One of the most reliable methods of fast installation of connection elements includes usage of screw terminals. Different variations of such terminals are commonly used starting from electronics to industrial automatics.

Wide-ranging solution for all installation requirements

Our Terminal Blocks series is a wide-ranging solution for all installation needs ranging from low­voltage switchgear and control gears for industry and construction to building automation. Because our Terminal Blocks can be used with both Al and Cu conductors it saves trouble for designers in both the OEM industry and mechanical engineering.

Wide-ranging mounting possibilities

50 mm² terminals are attached to a DIN rail. The biggest, the 240 mm² terminals, are screw­mounted on to the base. The 95 mm² and 150 mm² terminals can be mounted either on a DIN rail or with screws on to the base. The terminals can be securely attach to the rail and retain in position.

One-pole Terminal Blocks

One­pole terminal blocks are designed for connecting or extending both aluminium and copper conductors from 2.5 mm² to 220 mm².

1 feed terminal blocks

2 feed terminal blocks

3 feed terminal blocks